Frequently Asked Questions (FAQ) for Builders

In addition to using materials that are virtually 100% recyclable, Ceco supports numerous green building objectives and strives continually to advance our sustainable building capabilities, like cool roof technologies. A Ceco building can help you achieve LEED points in several areas, as detailed in the chart below.

1. This table assumes LEED-NC v2.2 unless otherwise noted.

2. LEED requirements are based on all materials constructed under the project contract, of which the metal building is only a portion.  Actual requirements may not be achieved once all materials are considered.  Credit values shown on this table reflect those available, not necessarily those that are earned for a given project.

3. The use of cool roof colors may actually not be allowed in the energy code used for your project.  In colder climates, darker roof colors may result in optimal energy performance.  Consult your design professional for local requirements.

4. The claiming of Exemplary Performance points may be limited.

5. Using the US Steel Recycling Institute industry averages for March 2009.

Factory Mutual has design requirements that go beyond most model building codes and vary by location. Your end customers should contact their local Factory Mutual insurance representative to get the requirements for their specific building. These requirements will vary depending on location, building size and FM representative. If the project is an architectural job, the requirements should be listed on the plans and/or specs.

The Metal Building Manufacturer’s Association (MBMA) has worked closely with Factory Mutual and other insurance companies to establish a clear understanding of their requirements and utilize nationally recognized consensus standards where possible. Ceco can design your building to any additional requirements over and above the local building codes, but it is important that these insurance requirements are discussed early in the planning and design stage, as they may have significant impact on the building design.

Ceco must inform the builder of the loads imposed on the foundation by the metal building system. However, the anchor bolt plans we prepare are intended to show only the location, diameter and projection of anchor bolts required to attach the metal building system to the foundation. Ceco is not responsible for the design, materials or workmanship of the foundation.

The Common Industry Practices Section of the Low Rise Building Systems Manual places responsibility for the foundation on the contractor or end customer, unless altered by a specific agreement between the parties involved. The contractor or end user must ensure that adequate provisions are made so that the foundation can properly support the metal building system. These provisions include specifying bolt embedment, bearing angles, tie rods and/or other associated items embedded in the concrete foundation, as well as foundation design for the loads imposed by the metal building system, other imposed loads, as well as the bearing capacity of the soil and other conditions of the building site.

Visit Find a Ceco Builder on this website to find a Ceco builder in your area. Select a state from the map to search by state, or try one of the other search options offered in the menu.

Yes! Ceco is committed to educating erectors in the proper use, methods and procedures for installing our roof systems. We offer an in-depth, two-day certification course that offers classroom lecture, as well as hands-on training for Ultra-Dek®, Double-Lok®, SuperLok®, BattenLok®, LokSeam® and Craftsman™ HB Series products. This certification is required for Standard III warranty and all Single Source™ warranties.  To learn more about our new and innovative training program, please reference our Certified Installer Program.

No, each market and region is unique and has different potential. Your District Sales Manager will work with you to maximize sales and leads.

Yes, our marketing group works through several online sources and national publications that have “reply card” services, and these leads are usually directed back to the appropriate District Sales Manager.

Yes, we provide complete computer-based training for our industry leading pricing/design software, and classes are held in many regions several times throughout the year. In addition to pricing, Ceco also offers “hands on” erection classes with full-size product models.

Yes, we can provide full design and coordination on the metal building. Foundation designs, however, are provided by others. Your District Sales Manager can suggest local foundation design engineers, if requested.

Ceco Building Systems’ fundamental belief is to “Build Success” with our Ceco Authorized Builder Network. Our Authorized Builder Network is the best resource for our experience. Find detailed accounts of our existing builder experiences in their own words, from this collection of testimonials.

An Authorized Ceco Building Systems builder is a company that has been appointed by our local District Sales Manager. This appointed company will represent Ceco Building Systems in their respective marketplace.

Ceco Building Systems has a national network of District Sales Managers that are responsible for their respective territories. If you are interested in becoming a Ceco Building Systems Authorized Builder, please contact your local District Sales Manager.

Ceco Building Systems has a national network of District Sales Managers that are responsible to maintain and develop their respective territories. To work with an Authorized Ceco Builder we prefer that you contact our local District Sales Manager. The local District Manager will then match your need with the best possible Authorized Ceco Builder.

1. Click on the section you are trying to access (Track your Job, CecoPro or CBS-Xpres).
2. Enter your builder number and password.
3. If you have any problems with login, please call 800-474-CECO (2326).

For Track Your Job or CecoPro, call 866-867-7878 or 800-474-CECO (2326).
For CBS-Xpres or MyMarketing, call 800-474-CECO (2326).

Ceco Building Systems provides manufactured steel for any “low rise” commercial construction market. Our manufactured steel is most often utilized for the following construction markets:

• Industrial
  
• Manufacturing
  
• Warehousing
  
• Automotive
  
• Recreational
  
• Institutional
  
• Religious
  
• Retail
  
• Governmental

Ceco Building Systems manufacturers for the “low rise” Construction Industry. Ceco Building Systems would approach a large facility by encouraging the Authorized Builder to employ one of our Engineering Service Centers. Our Ceco Engineering Service Center would then determine the most cost effective design for any large facility opportunities. We are only restricted by the project if it does not meet the “low rise” requirements.

Ceco steel building systems have been used to build everything from office buildings, automotive dealerships, retail locations and warehouses to schools, churches and government buildings—not to mention the wide variety of steel agricultural buildings we construct, including steel barns and livestock buildings, grain-storage structures and steel farm buildings. In addition, our metal wall paneling systems can be used in combination with traditional materials, such as brick, stonework or glass, for added architectural flexibility. To see real examples of the diversity and beauty of a Ceco metal building, view our project gallery.

Ceco Building Systems utilizes different framing systems based on the projects varying criteria. Please click on the following link to view typical framing systems.

The paneling systems offered by Ceco Building Systems cover a wide range of materials and profiles. Please click on the following links that can bring you to our paneling pages.

Ceco Buildings are designed and engineered to meet your state’s code requirements. They will be as “strong” as any comparable system available. In addition if you would like to build extra “strength” into the design of your building, our Engineering Service Centers can accommodate your additional requests.

Ceco Building Systems incorporates a versatile, green and cost competitive design. Our Steel Building Construction in most cases is delivered quicker, better insulated and more cost effective. Encompassing the Primary Framing, Secondary Framing, Roof Systems, Wall Systems and Foundation Reactions together makes the construction process much more seamless for the builder and customer. Our Engineering staff will stamp our project drawings and foundation reaction design. The question is why not try the Ceco Building System approach to construction?